Distribution Transformer Manufacturer
Electrical Transformer Manufacturer in Gujarat
December 11, 2020
Electrical Transformer Manufacturer
December 14, 2020
Distribution Transformer Manufacturer
Synergy Transformers Pvt. Ltd. is a well-known and successful Distribution Transformer Manufacturer in Gujarat, India. We are a team of engineers with expertise in the electrical field.
Distribution transformers are normally located at a service drop, where wires run from a utility pole or underground power lines to a customer’s premises. They are often used for the power supply of facilities outside settlements, such as isolated houses, farmyards. Another application is the power supply of the overhead wire of railways electrified with AC. In this case, single-phase distribution transformers are used.
We mainly manufacture two types of Distribution Transformer,
1. Off Load Distribution Transformer
Specifications
| Type | Indoor/ Outdoor Pad Mounted |
|---|---|
| Voltage Class | 3.3, 6.6, 11, 22, 33 Kv or special class by customer |
| Vector Group | Dyn11, Dyn5, Dyn1 or other specified by the customer |
| No. of phase | 3 phases |
| Frequency | 50/60 Hz |
| Tap Range | ±7.5 %, +5% in 2.5% steps or as per requirement of customer. |
| Winding Material | Copper with multiple papers covering |
| Applicable Standards | BIS-1180, IS-2026, IEC 60076 |
| Painting | Epoxy, Polyurethane or specified by the customer |
2. On Load Distribution Transformer
Specifications
| Type | Indoor/ Outdoor Pad Mounted |
|---|---|
| Voltage Class | 3.3,6.6, 11, 22, 33 Kv or special class by customer |
| Vector Group | Dyn11, Dyn5, Dyn1, or other specified by the customer |
| No. of phase | 3 phases |
| Frequency | 50/60 Hz |
| Tap Range | ±10 %, +5% To -15% in 1.25% steps in 17 position or in 2.5% steps in 9 Positions or as per the requirement of the customer. |
| Winding Material | Copper with multiple papers covering |
| Applicable Standards | BIS-1180, IS-2026, IEC 60076 |
| Painting | Epoxy, Polyurethane, or specified by the customer |
Uses of the Distribution Transformer:
- This transformer changes from high voltage electricity to low voltage electricity, used in homes & businesses.
- The main function of this is to step down the voltage to provide isolation between two windings like primary and secondary.
- This transformer distributes the power to remote areas which are generated from the power plants.
More products are listed on Our Products Page.
You can see Industries We Serve.
For more details and queries you can Contact Us.
